Orkut: Finally a scrapbook flooder for new orkut codes!!!
MAJOR UPDATED: (2007, August 27)
Updated again for new Orkut (Read more about new orkut). Maintaining two versions now for old as well as new orkut! If you have updated scrapper in last week then it should automatically update itself! Otherwise use following links 
This is my first firefox extension and created in hurry!
With time will add new features like community flooding, testimonial flooding, etc to it!
Help on flooder is available @ toolbar itself!
#Installation:
Requirement: You must be in firefox to do this! (Download Firefox)
Click here to install scrapper for ORKUT
If a window with title software installation does not pop out look at top-right corner of page! You will see something like below! Click Edit Options to proceed…
Next allow Devils Workshop to install scrapper by
Now click here again to install scrapper. This time a window with title software installation will pop out!
Finally restart firefox to complete installation!
After successful installation you will see a toolbar added to firefox below address/navigation bar as can be seen in following screenshot.
#How to use…
A. Start Flooding (click on image to enlarge)
- Open any orkut scrapbook, write scrap the way you want with all formatting like colors, smilies, etc.
- Enter time interval in the space provided on orkut toolbar. (More on this later)
- After you done writing just click start flood button on toolbar instead of post scrap button provided by orkut.
B. Stop Flooding
- Just close the tab/window and flooder will stop automatically!
# Time Interval
Time interval is time between two consecutive scraps! Small value means fast flooding
Unfortunately time interval also depend on your internet connection speed so you have very limited choice.
Here I am giving some values for time interval. Adjust as per your connection, load, etc. as these are rough values.
- 56 kbps : 2500-3500
- 128 kbps: 1500-2500
- 256 kbps: 1000-1500
- 512 kbps: 800-1200
- 1Mbps: 500-800
- 2Mbps: 300-500
- 8Mbps: 100-200
Just play with few intervals for the first time. Once you get some value working for you, always use the same!
#Uninstallation:
- Go to Tools >> Add-ons in firefox command menu!
- A small window named Add-ons will pop-out showing list of installed add-ons.
- Click uninstall next to scrapper.
- Restart firefox to complete the installation!’
#FAQ
1. I got “page not found error” and I can’t scrap anyone now 
This happens when you use flooder a lot. Orkut disables your account temporarily (usually for 10-15 hours). So just have a break! May be this is time to take a bath! 
2. I got error: “Bad, bad server. No donut for you”
This normally means orkut server is overloaded. You just start flooding again with small increase in time interval. If you are getting this error again and again you should flood later.
3. Flooder stops after sending 2-3 scraps! :O
This happens when you provide very high time interval! Boy you are flooding so just try to half the time interval repeatedly until you go!
If you any other question feel free to ask… Wish u happy flooding…
4. Can I flood any scrapbook?
No the person you are flooding must be in your friend-list!
#Update History:
Year 2007:
- August 27 - Updated again for new Orkut (Read more about new orkut). Maintaining two versions now for old as well as new orkut!
- August 20 - Updated to work with new scrapbook features (Read More about new features). Added Automatic Update support so this is last time you have to go through all the pain of reinstalling this!
- August 10 - Updated for firefox 2.0.0.6 as well as new orkut codes to detect empty scraps!
Year 2006:
- October 29 - Scrapper updated to work with firefox 2.0!
- September 13 - Scrapper failed to work during last few days due to new search box in top-right corner inserted by orkut.
If you like this post, you may subscribe to my RSS feed or email alerts to receive automatic updates in future! Thanks for reading... :-)
Related Posts
- Standalone Working Orkut Scrapbook Flooder for New Orkut!
- Updates: Orkut Codes Changed Again!
- Orkut: Latest Fan Flooder!
- Orkut Video Flooder JavaScript - Add your favorite video as many time as you want!
- Orkut changed codes again… :-(
- Orkut Added Scrapbook Privacy Feature! Safeguard your scrapbook against strangers!
- Adding Photos to Orkut Scrapbook Made Easy as Orkut Integrated Picasa into Scrapbooks!
- Orkut Viewing Locked Scrapbook Hack is Back!
- OrkutFeeds - Get RSS Feeds for Orkut Scrapbook!
- Orkut Planning for Major makeover! Adding Photo Upload Support to scrapbook!
rohit said, on August 10, 2006 @4:41 am
nice work dude…..
Darnell Clayton said, on August 10, 2006 @1:33 pm
Hey Rahul,
I tested this hack out, and it did not work (well, it did, but for only one or two scraps).
I have seen several Orkut hacks become “non-functional” lately, which makes me think Google is doing everything it can to hinder potental spam programs.
I did a review on Inside Orkut if you care to look. Let me know when the latest update comes.
~Darnell
Anonymous said, on August 10, 2006 @1:34 pm
some minutes work then it says this
Page not found
We’re sorry, but there is no orkut.com Web page matching your entry. It is possible that you typed the address incorrectly, or that the page no longer exists.
Rahul Bansal said, on August 10, 2006 @2:54 pm
Thanx Darnell for ur review…
its really pleasure to be reviewed on ur blog…
man flooder is still workin n jus tested it…
actually i wz quite sure about its performance n wudn’t hv cared if somebody else complained…
bt u can check out following
scrapbook….
its my account for testing pupose so dnt scrap in it….
JUST TRY WITH DIFFERENT TIME INTERVAL…
ALSO “NO DOUNT” ERROR ALWAYS MEANS SERVER IS BUZY AND U SHUD TRY AFTER SOME TIME…
OR U CAN JUST RELOGIN…
Rahul Bansal said, on August 10, 2006 @3:01 pm
TO ANONYMOUS:
“PAGE NOT FOUND ERROR” will never show up on flooder failure….
Try it again dude n also check scrapbook link in above comment so confirm the success of flooder…
Anonymous said, on August 11, 2006 @8:58 pm
This wht i got after i clicked on the downlaod link…. whts the matter?
Download file
Sorry, but download disabled for file “scrapper.xpi”.
Reason:
hay man where is scrapper is not working right now man
Rahul Bansal said, on August 11, 2006 @9:04 pm
DOWNLOAD LINKS HAS BEEN UPDATED…
SORRY 4 INCONVENIENCE…
WILL ADD MORE DOWNLOAD LINK SOON…
Amey said, on August 12, 2006 @6:19 pm
can u put it at mozilla official site, i have searched there but it seems that they have previous version
Anonymous said, on August 14, 2006 @9:14 pm
hiiiii i m unable to dowmload scrapper.xpi
Rahul Bansal said, on August 14, 2006 @9:21 pm
r u using firefox???
it will not work without firefox…
there is no prob with downloading..
jus checked!!!
Wanderer said, on August 15, 2006 @3:04 pm
i think orkut has fixed this
Rahul Bansal said, on August 16, 2006 @5:54 pm
TO: WANDERER
ORKUT IS NOT FIXED THIS…
Fixing things like these are not easy thought its possible in theory!
Rahul Bansal said, on August 16, 2006 @5:58 pm
TO: AMEY
I submitted scrapper on mozilla’s official website from 5-dayz but still they haven’t approved it!
I dont think they will allow such things on their official website!
Anonymous said, on August 17, 2006 @6:06 pm
Page not found
We’re sorry, but there is no orkut.com Web page matching your entry. It is possible that you typed the address incorrectly, or that the page no longer exists.
this error i gets after 2-3 mins..plz solve tht problem
Anonymous said, on August 18, 2006 @5:53 pm
yaar i am unable to download this bcz it opens just a page of uploadglaxy.com
when i click on download this page come agaian and have 2 wait again for 30 seconds
all this thng repeat again and again but nthng to download:(
Rahul Bansal said, on August 18, 2006 @6:05 pm
DOWNLOADING SCRAPPER
On uploadgalaxy, when counter reaches zero u can see download this file button.. u hv to hit that button before 120 seconds otherwise it starts counter again….
Also check turn-off ur pop-up blocker if its active!!!
To assure u, just downloaded scrapper from uploadgalaxy…
Pratik said, on September 1, 2006 @12:52 am
I really admire orkut, especially the way we get to meet old friends there.
But theres an essential problem with these kinds of sites..
in their bid to make the huge no of people communicate easily with each other, security often goes for a toss.
thats where i think newer social networking sites, especially Grupus.com are making their mark.
Using them u instantly get the feeling that privacy and security are their top priorities.
that said, there should be some definite solution on scrapbook flooding..sumtimes it gets very irritating.
tushar said, on September 3, 2006 @1:37 am
hey rahul i think u shud check it once again as it dosen’t works.
at most it sends 2 scraps and then a message tells that u must wait sm minutes to send more scraps.
i think google team is really a smart one.
by the way can u help me i’m a budding programmer and need sm expert advice which u seem quite capable to give.
Rahul Bansal said, on September 3, 2006 @4:23 am
To: Tushar
U’ll get that massage when u r flooding in a person’s scrapbook who is not on ur friend list!
I flooded yesterday 1000+ scraps to one of my friend!
So check out n lemme know if i got ur prob right!
Anonymous said, on September 3, 2006 @3:13 pm
Can I use a Specific Message for scrap book Flooding ???
Anonymous said, on September 3, 2006 @3:17 pm
Can i use a specific comment or a word to use for flooding like bye 1000 times ???
neo said, on September 8, 2006 @10:57 pm
yo man ur tool works like a charm.. though after some time orkut blocks it.. it works .. try after few mins..
Rahul Bansal said, on September 13, 2006 @6:15 pm
TO: Anonymous
you can use any message with all kind of formatting! Type whatever you want to flood in scrapbox provided by orkut and just hit start flood button on toolbar instead of submit button provided by orkut.
Rahul Bansal said, on September 13, 2006 @6:24 pm
TO: Anonymous
No. Scrapper does not keep track of no. of scraps being sent. Still ypu can do it manually.
To get an idea about its speed. You have to observe scrap-count periodically.
e.g. Time interval of 1000 milisecond does not mean the person will get 3600 scraps over an hour!
Rahul Bansal said, on September 13, 2006 @6:29 pm
TO: Neo
You got it right dude.
TO: All Orkutians
please use it with interval and don’t scrap someone like 500+ scraps in a session.
Your account many get block temporarily.
VIP said, on September 13, 2006 @6:50 pm
Orkut has introduced a search bar and hence, it becomes the first textarea and hence, the scrapper fills that…
Rahul Bansal said, on September 13, 2006 @7:03 pm
yep.. just noticed this… wil correct scrapper!
thanx dude! it was more than comment!
Rahul Bansal said, on September 13, 2006 @7:09 pm
corrected scrapper… but need an hour to make it avilable for download!
Sushant said, on September 16, 2006 @6:49 pm
SEE NEW LOOK OF ORKUT AND MODIFY THIS TOOL
EVERY FLOOD ENTRY GOES IN THE SEARCH BOX
I THINK THIS IS EASY
DO IT
SUSHANT
Rahul Bansal said, on September 17, 2006 @1:39 pm
To: Sushant
Its already modified for that…
read post again…
Rahul Bansal said, on September 17, 2006 @1:43 pm
To: Arvind
Sorry to delete your ccomment… it was nice…
but there was no space in between super,super,..
so it was affecting design of this in Internet Explorer…
my sidebar was going to the bottom of page n this post became really hard to read…
sorry arvind… thanx 4 that anyway..
Anonymous said, on September 19, 2006 @12:37 pm
I M not able to use the scrap flooder. i have installed the grease monkey and the orkut toolbar. But when i download Scrapper.xpi it gets downloaded to the hard disk and then when i try to open it the comp is unable to open the file and plus it also now says that it is not a valid Win 32 application. what the hel.
Anonymous said, on September 20, 2006 @1:57 pm
I M not able to use the scrap flooder. i have installed the grease monkey and the orkut toolbar. But when i download Scrapper.xpi it gets downloaded to the hard disk and then when i drag it in firefox it try to open it in java(TM)2 Platform standard edition and then an error msg invalid or corrupt file……
Rahul Bansal said, on September 20, 2006 @3:12 pm
Scrapper will be downloaded to hard-disk only!
U can always drag-n-drop it on firefox!
For win32 application error i cant say much as scrapper is not an application but it is an extension.
For java related error try updating your java plug-in for firefox!
Also scrapper will work only with firefox 1.5.x!
Anonymous said, on September 20, 2006 @5:45 pm
thanks 4 reply. but i am still unable to start it. First ur URL address is inaccessible so i use unipeak to access. when i download the scrapper, it download a file gethtml.php. when i unzip it, it creats two file install.rdf, chrome.mani and a folder name chrome which contain scrapper.jar file. and no xpi file.
i am very thankful if u send the direct download link and anyother help.
Rahul Bansal said, on September 21, 2006 @10:02 pm
man which platform u r using??
Did u installed firefox 1.5+ ???
Cause i tested it twice a day…
yesterday as well as today…
theres no prob…
scrapper.xpi will be downloaded to your hard-disk. Just open it in firefox or u can just drag-n-drop it on firefox.
When u do this firefox will prompt u to install it!
Rahul Bansal said, on September 21, 2006 @10:42 pm
The orkut has now got a way to stop the scrap flooder. It now prevents sending too many messages in a minute and hence the scrap flooder is not working now.
Anonymous said, on September 22, 2006 @5:05 pm
man which platform u r using??
Did u installed firefox 1.5+ ???
Cause i tested it twice a day…
yesterday as well as today…
theres no prob…
I am using firefox 1.5.0.7. i have solved the problem. actually when i download it, a file name gethtml.php was created which could not be opened in firefox, but when i chaned the extension of php to xpi then it was installed.
Thanks to u and a very big hand for RAHUL
Rabimba said, on September 25, 2006 @3:25 pm
Well I think the newly implemented captcha system of orkut is preventing
it to flood anymore. after the 3rd scrap it is getting blocked
can’t you do anything about it?
Rahul Bansal said, on September 28, 2006 @11:57 am
nope… scrapper is working fine… just tested it with 110+ scraps in one go…
u might be flooding someone’s scrapbook who is not in ur friend-list!
Sachin said, on October 6, 2006 @6:29 pm
hey…
not working
i got this error
Page not found
We’re sorry, but there is no orkut.com Web page matching your entry. It is possible that you typed the address incorrectly, or that the page no longer exists.
wat shold i do???
Rahul Bansal said, on October 12, 2006 @12:06 pm
To: Sachin
I think u got that error after flooding say 500+ scraps!
Normally u get that error after a BIG flood and then u can scrap someone even manually!
the only solution to this is try flooding after some time!
NAZISH AHMED said, on October 22, 2006 @12:23 am
heyyyy dear,
i am not to flood yaar…how should i use it ???? i write time interval and click on start flood .but it not working…owien oweinnnn:(
nazzy said, on October 22, 2006 @12:23 am
help me out plz
Rahul Bansal said, on November 4, 2006 @4:24 pm
To: Nazzy
what type of error message u got??(if any)
tel me the time interval u hv used! Also list as much details as possible!
sorry 4 replyin late!
Anonymous said, on November 10, 2006 @12:36 am
We’re sorry, but there is no orkut.com Web page matching your entry. It is possible that you typed the address incorrectly, or that the page no longer exists.
this error i gets after 2-3 mins..plz solve tht problem
Anonymous said, on November 17, 2006 @2:04 am
thanx man!! i do search engine optimisaiton .i put it in my profile in orkut named search engine optimisation. thanx– search engine optimisation
Parth said, on November 27, 2006 @10:46 am
i ve broadband i used many diff time intervals 1000 1200 1300 nt workin properly. works only 4 4-5 scraps..
Anonymous said, on January 13, 2007 @1:09 pm
only 3 scraps at a time
nambad said, on March 15, 2007 @10:20 am
hey i m not able to scrap
it gives n error
can neone help me out
We’re sorry, but there is no orkut.com Web page matching your entry. It is possible that you typed the address incorrectly, or that the page no longer exists.
pls help me and send me a mail on nambad@gmail.com
thaank you
Rahul Bansal said, on March 17, 2007 @10:29 pm
@Anonymous (we are sorry..)
Its either temp. problem or effect of overflooding. Anyway I guess it has solved now!
@Parth
Try Intervals like 100-200!
@Anonymous (3-4 scraps a time)
Try lowering interval! Better go for half d value u hv tried earlier!
@Nambad
Its either temp. problem or effect of overflooding. Anyway I guess it has solved now!
ebe said, on March 18, 2007 @3:14 pm
Hi,
I had sent around 500 scraps to a friend of mine using the javascript. Now, I get the following message
“Page not found
We’re sorry, but there is no orkut.com Web page matching your entry. It is possible that you typed the address incorrectly, or that the page no longer exists. “
To my grief, Orkut does not allow me to scrap anyone. What do I do? Is this problem temporary or has Orkut blocked me from scrapping permanantely.
Regards,
Ebe
Rahul Bansal said, on March 18, 2007 @3:28 pm
@ebe
I had same experience long time back!
As I remember it will restore ur acoount soon! (probably it is restored by this time)
But my account got deleted after around 20 days!
so be careful to back-up ur friend-list! So if ur account gets deleted it will be easy for u to invite all ur friend in one shot from new account!
vishal said, on March 23, 2007 @3:51 pm
Hi Rahul, thanks for making this great script. It works great but its adding a random number to each post in silver color.
when i push start flooding it adds silver [xxxxxxx(number)] to the text area and it changes wth every scrap.
What should i do. FF 1.5.0.9
Rahul Bansal said, on March 25, 2007 @4:52 pm
@Vishal
random no. is necessary to alter the content of consecutive scraps! without that you will get message like “this text has been posted too recently”!
by d way i’m working on its next version which will use some other techniques to skip orkut error messages without using random no.!
But due to exams n tight schedule it may take another a month or two!
shahid said, on April 5, 2007 @8:30 pm
hi
can you plz tell me how to set time itnerval to 20 seconds because when ever i flood any scrap book which is not added to my friends list after 3 msgs it says you have to wait for 1 min or if it works upto 7 posts after that it says wait upto 7 mins
i think this problem can be solved if i put the time interval of 20 seconds between each msg.
Rahul Bansal said, on April 8, 2007 @4:17 pm
@Shahid
First Thing: You can not flood any strangers scrapbook. (The person has to be on ur friend list + He shouls not added you to his ignore-list)
Time Interval: You can always control that using Time Interval field in scrap flooder Toolbar!
Please note that, Time interval depend on your connection speed. (Higher the connection speed, less time interval is needed)
One more thing : if time interval is too low or too high flooding will not take place. So you may need to play a little bit to optimize time interval!
sarthak said, on April 10, 2007 @11:41 am
thanx..very well done indeed…all hands down
Ranjeet said, on April 21, 2007 @11:54 am
when i start flooding..after flooding 3 or 4 post..it says “u recently posted same scrap..wait for 1 minute”.
Rahul Bansal said, on May 2, 2007 @3:52 am
@Sarthak
Ur welcome buddy… Welcome To Devils Workshop!
@Ranjeet
Tested it! Working fine! Try reducing time interval! Or give more details like ur internet speed, etc…
Thalib said, on May 8, 2007 @1:13 pm
yo thx man!! it workz perfctly!!! u rOK!!
Siddharth said, on May 12, 2007 @11:37 pm
dude, on megashare, it shows that its been deleted by the admin, so upload it on mediafire.com dude….
plz do it…
Rahul Bansal said, on May 12, 2007 @11:45 pm
@Siddharth
Dude links in above post are right. (Checked myself)
Actually they were modified but was never pointing to deleted links.
I guess you might be tried link from some other site in that case you can any of the above link.
Anyways you can click here to download scrapbook flooder extension!
Lemme know if problem persists…
Abhinav Sood said, on June 3, 2007 @8:01 pm
Not working for me .. it stops after sometime without evn writin a single post ..
Rahul Bansal said, on June 4, 2007 @12:54 am
@Abhinav Sood
You were right! Sorry for trouble
Updated Scrapbook flooder and tested it too!
Happy Flooding
shivesh said, on June 25, 2007 @2:28 am
Page not found
We’re sorry, but there is no orkut.com Web page matching your entry. It is possible that you typed the address incorrectly, or that the page no longer exists.
this error i gets after 2-3 mins..plz solve tht problem
Rabimba said, on July 21, 2007 @9:47 am
Rahul have you tested it recently?
It is not working anymore. I tried with different time intervals too.
Rahul Bansal said, on July 22, 2007 @10:48 am
Actually it was not working for last 2-3 days but it should be working again by now!
Test again and let me know!
Sorry for inconvenience…
crazy said, on August 6, 2007 @10:14 pm
its not working……….
manav said, on August 10, 2007 @12:23 am
its not at all working
Rahul Bansal said, on August 10, 2007 @12:20 pm
Updated! Its working now….
Please Reinstall it!
Sorry for inconvenience!
tariq said, on August 19, 2007 @1:43 am
hey Bro Its Not WorKINg WaT ShOUld I DO!
Do U haV any other ONE!
alu said, on August 19, 2007 @6:31 pm
not working
Rahul Bansal said, on August 20, 2007 @11:13 am
Updated Again! Its working now.
Also added support for automatic update!
So next time Orkut changes something, you will get new scrapper automatically! Kool na??
Thanks Tariq, Alu & Sarah for bringing it to my notice!
Sorry for delay as I was out of town on weekend!
nikhil said, on August 23, 2007 @8:34 pm
we’re sorry, but you must wait 1 more minute(s) before you can post another scrap to this scrapbook because you have posted other scraps too recently
this is da msg i get wen i try 2 flood!!!!!!
neway 2 combat this??????
Rahul Bansal said, on August 24, 2007 @12:28 pm
Hello Nikhil…
It seems you are trying to flood a person’s scrapbook who is not in your friend-list!
You can not use scrapper on any person who is not in your friend list!
khan said, on August 25, 2007 @6:22 am
can i have its source code plz
Rahul Bansal said, on August 27, 2007 @11:42 am
Hello Khan,
First sorry for replying late as I don’t blog on weekend!
Now You can have source code of any firefox extension!
1. Just open the Install link from IE or any lame browser!
2. It will get downloaded as a file on your harddisk with extension .xpi
3. Just change that extension from .xpi to .zip
4. Uncompress the final zip file using any zip utility (preferably WinRar)!
Also if your are on Linux .xpi files can be uncompressed directly!
Finally feel free to reply if you stuck somewhere. Its really good to see someone is interested in source code!
Faizan said, on August 27, 2007 @1:14 pm
I have used flood scrapper with old orkut look but can i use it with new look of orkut?
and from where to get an update?
Rahul Bansal said, on August 27, 2007 @4:20 pm
@Faizen,
Updated scrapbook flooder for new look of orkut!
Check scrapper installation link in posts for new orkut.
You need not to remove old scrapper manually as this will overwrite previous version automatically!
rohit said, on August 28, 2007 @3:53 pm
dude its(scrapper for new orkut) working only in my scrap book not my frnds
Rahul Bansal said, on August 28, 2007 @6:31 pm
Sorry for trouble rohit!
I tested it on my scrapbook only!
Anyway its WORKING now on friends scrapbook too…
You may need to update it manually as I am new to version controlling…
rohit said, on August 28, 2007 @7:17 pm
this(new look) works only for own scrap book
Rahul Bansal said, on August 28, 2007 @7:19 pm
Install updated version dude!
This is definitely flooding others scrapbook for new orkut looks!
rohit said, on August 28, 2007 @7:20 pm
thnnnnxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
its working!!!!!!!!!!!!!!!!!!111
Rahul Bansal said, on August 28, 2007 @7:26 pm
Ur welcome buddy!
For one second you dried my mouth…. Cause I am really having hard time here at DW making old hacks compatible with new Orkut!
Anyway Welcome To Devils Workshop!
umar chaudhry said, on August 30, 2007 @12:56 pm
yaar fit cheez hai ye flooder but yaar aik kam aur karo plz yaar ye max aik time main 500 must flood kare anywayz thanx
Saurav Rout said, on August 30, 2007 @1:52 pm
Working Perfect…
Rahul Bansal said, on August 30, 2007 @4:13 pm
Thanks umar!
Thoda time milne par update karunga! Fir jitne bole utne scrap bina rukawat ke jayenge!
Rahul Bansal said, on August 30, 2007 @4:16 pm
Thanks Sourav 4 positive feedback!
I really appreciated it as very few people gives positive comments. Most of the time I see people comment when things are not working!
tariq said, on September 6, 2007 @2:16 am
hey yar it hav stop working again yestarday it was working but doesnt!
saboor said, on September 6, 2007 @4:31 pm
its not working
Rahul Bansal said, on September 6, 2007 @5:35 pm
Just updated it!
I guess u have noticed it when u started firefox!
Else run “find updates” from “tools >> add-ons” in firefox!
ekansh saxena said, on September 6, 2007 @9:01 pm
well rahul… i should say.. its really great… and thankx for providing this add on… and your efforts…. appriciated really… thankx man…
Rahul Bansal said, on September 14, 2007 @10:38 am
Thanks 4 your nice and encouraging comment ekansh!
Welcome To Devils Workshop!
Yaser said, on September 14, 2007 @9:15 pm
Hey … gr8 job yaar … but i want to ask something … when i start flooding … why only 147 scraps comes ? .. i want to do 1000 :$ pls help
Thanxxx From
>>
Rahul Bansal said, on September 18, 2007 @9:05 pm
First sorry yaser for late rep!
Now about your question!
Well its hard to do that in one shot as Orkut bans u!
So better go for 100 scraps each day or create 10 fake profile and flood scrapbook from 10 profiles!
Yaser said, on September 19, 2007 @3:52 pm
hey its ok, thanxxxxxxxxxxxxx a million bhai i hope you rock more and more
sid said, on October 16, 2007 @3:16 am
hey rahul … it works few times … but now i am trying its not working ….
Praateek said, on October 17, 2007 @6:49 pm
Hey its doing everything every no. such as the no. 18251328 is coming after my word but the scraps are not increasing
Rahul Bansal said, on October 22, 2007 @11:29 pm
@Sid
First sorry for late reply!
If this script stops before 300 scraps then please reduce time interval and go on!
if u r getting temporarily blockedthen dont worry as ban will last for 8-10 hours!
If u still need help… write bak!
Rahul Bansal said, on October 22, 2007 @11:37 pm
@Prateek
First sorry for late reply!
Scraps will increase in background while flooding is in progress!
just refresh the scrapbook!
Karthik said, on October 24, 2007 @5:15 pm
Hey. Its not working for me. I enter the time interval and select start flood. the number in silver keeps on changing. after a min, I stop to check how many scraps have been added and it shows the same number as before.
Help!
4uwhoami said, on October 27, 2007 @8:03 am
hey this is not working ..
shows flooding..
but when checked on the scrap book…not even one scrap added….
a said,